All images © by Paul Nitsche 1991-2024.
It was great to be outside in a sunny warm Spring evening opening the mold for the plates for The Ephemeral Knot and All Horizons Lost... But as soon as I started removing the investment, I knew my pieces were in trouble. Maybe the metal was poured too hot, maybe my investment mix wasn't right, but there was an astounding amount of flashing. Some of the castings can be salvaged, but some will have be redone.
The investment mold outside the foundry. I couldn't wait to see how the castings turned out.
After I removed most of the investment from the castings, it was obvious the pieces had a huge amount of flashing. This image is of the long All Horizons Lost... plate.
The opossum mandible still with a bit of investment around it.
The investment tree with the investment removed. Look at all that flashing- I just felt sick at this point. It's as if I brought this up from the ocean floor.
The All Horizons Lost... plate. What a mess. Besides the flashing it is warped and twisted. I tried to make it thinner than I usually do and I think that contributed to the distortion.
The ugly seven. I think I can salvage most of this, but the long title plate for All Horizons Lost... will have to be redone. There are many hours of grinding and finish work ahead of me.
Below are pictures of the last bronze pour at the University of Wisconsin foundry. I poured my investment mold for the title plates of The Ephemeral Knot, and All Horizons Lost, Flesh Forever Found, as well as a few other waxes for future pieces. Observing this time was a group from a local high school.
Foundry pour, April 2016.
Setting up the molds with the pour team.
Practicing the pouring order of the molds.
Sculptor and Art Metals instructor Peter Flanary loading the forge with bronze. Take a look at his work HERE.
Bringing the bronze crucible out of the forge. A group from a local high school was observing.
The pouring of my investment mold.
Pouring other artists' investment and sand molds.
The remaining bronze is poured into ingots.
A sprue tree recently completed. Title and back plates for an upcoming large bronze sculptural piece entitled All Horizons Lost, Flesh Forever Found. Also the remake of The Ephemeral Knot title plate, and some other wax objects for future pieces.
Three sculpture title and name plates with a wax vertebrae and opossum manible.
A detail of the All Horizons Lost... title plate. Anterior and posterior heart views are sculpted on either side. This is the longest bronze plate I will have made, at 1.5" x 14".
The All Horizons Lost... plate on the sprue tree.
The Ephemeral Knot remake wax and the All Horizons Lost... name plate. Also a pine cone experiment. The pine cone should burn out into ash within the kiln.
A few small pieces for future sculptures. A leaf experiment, a vertebrae, and an opossum mandible.
The wax tree now in it's investment mold, waiting to go in the kiln at the University of Wisconsin foundry.
I wanted to share more pictures from the last bronze pour at the University of Wisconsin Foundry. Two of the investment molds were my own, the rest belonging to other artists.
The investment and sand molds waiting in the sand pit.
The forge heating up with bronze ingots.
Myself with the rest of the pour team.
My two investment molds. The blackened charring around the large one in typical, due to the large amounts of wax that was melted out.
Myself cleaning sand off other artist's molds.
Bringing the crucible out of the forge. I'm working the left side.
The crucible is lowered into the cradle and the crane is attached.
The crucible is slowly guided over to the sand pit with the molds.
Pouring the first mold, which happens to be mine. This is the largest mold that I have done and it was very exciting to finally get metal into it.
The pouring of my second mold.
Pouring other artist's work.
The remaining bronze is poured into ingots. About this time I was unbelievably hot. The heat radiating off the crucible and molten bronze is incredible to feel.
I recently completed an illustration for a very special upcoming project. The official announcement is yet to be made, but I wanted to share some parts of the piece in progress. Usually my illustrations are done in different mediums and pieced together into a whole image. Below are two pen and ink on scratch board drawings that were later incorporated into a larger composition. Before too long, I will present the illustration in it's entirety along with the news of the collaboration.
Girlchild number one. Pen and ink, Scratch board.
Girlchild number two. Pen and ink, Scratch board.
The rough waxes of the title and name/date plates for The Ephemeral Knot. On either side of the plates are castings of human finger bones, specifically that of a fourth proximal phalange. Note all the air bubbles in the lettering that need touching up.
The corrected wax title plate and a few other items on the sprue tree.
The corrected wax name and date plate on the sprue tree.
Brushing a skin coat of investment on the waxes.
At the foundry, pouring the bronze into the plates' investment mold.
The beauty of molten bronze.
After several hours, the mold is broken open and the removal and cleaning begins.
The rough bronzes. Unfortunately, the title plate has quite a bit of flashing. Flashing is a common casting defect caused when molten metal finds tiny cracks in the investment mold. Minor flashing can be fixed but the title plate will have to be redone. The name plate flashing is slight, and should clean up well.
I was a bit worried about how the arm would turn out because of how much bronze was used. If a metal sculpture is too thick, the cooling process can cause cracks or collapsing. Prior to investment, I thinned out what wax I could from the underside, but much of the sculpture had to be thick for future tapping and bolt placements. But everything formed well, and I'm really pleased with the level of detail.
Detail of the rough bronze.
Starting the removal of the investment.
The majority of the investment removed. There are some bones and pine cones for future pieces.
The arm removed from the sprue tree. There is still quite a bit of finishing work to do.
This will be my largest bronze sculpture as of yet, although there are larger ones to come this year. The brush on rubber mold with plaster mother mold worked beautifully, and I got a usable model on the first wax pour. The mold is going to be poured in bronze soon, and I'll be heading into the foundry this weekend to see how the piece looks.
The brush on mold of the arm sculpt with a two part plaster mother mold.
Filling the mold with wax.
The wax arm next to the original clay sculpt.
The wax arm is touched up and attached to a wax sprue tree and pour cup.
Putting on the detail coat of plaster and sand investment.
The main clay sculpt for the upcoming bronze, The Ephemeral Knot, is finished. The completed piece should invoke the wax anatomical models of Museo di Storia Naturale "La Specola" in Florence, Italy, which I was fortunate enough to tour.
The piece is a not too subtle reminder of childhood mortality. The obviousness is hopefully excused- for with classic form comes classic symbolism.
The next step is to make the mold for the investment wax.
Gratitude goes to Rebekah and Leif Hansen, for allowing me to life cast their daughter Nova's hand and arm. And thank you, Nova.
A heartfelt thank you to all who came out last night to hear me give my talk at the Freeport Art Museum. It really meant a lot and I felt very welcome. There were great questions asked and it was a memorable exchange of ideas and thoughts. Thank you so much.
The bell jar for the upcoming piece, Ossis Fateor Memoria, is finally complete. Many thanks to two Wisconsin glass artists for assisting me in creating what I had envisioned. Steve Feren helped me invest my wax placenta sculpt and did the glass casting. Richard Jones of Studio Paran completed the cold work on the glass placenta and helped me attach it to the bell jar. I thank them both for their time and patience working with me.
The original resin sculpt of the placenta.
The cast wax placenta.
Removing the cast glass placenta from the investment mold.
The finished cast glass placenta attached to the top of the bell jar.
With a new web design comes a new studio blog. I hope you got a chance to enjoy my past posts from the previous website. Version 2 will start anew and sorry to those who missed the first round of blogging. Here you will find the progress, usually very slow, on all my different artwork mediums: sculpture, drawing, and illustration and design.
